ESB Vader boots

Redaktør: Garrison Captain of the Guard

Besvar
Brugeravatar
27018
Danish Garrison Trooper
Danish Garrison Trooper
Indlæg: 461
Tilmeldt: tirs 09 maj 2017, 20:43

ESB Vader boots

Indlæg af 27018 »

Hej alle.
Jeg er ved at stille og roligt samle ind til en fremtidig Vader.
Jeg er dog i tvivl om støvler.
Jeg har fundet dem her, hvad tænker i kyndige folk? Billede
Man må gerne komme med forslag osv. BilledeBillede

Sendt fra min SM-G925F med Tapatalk

Brugeravatar
10413
Danish Garrison Trooper
Danish Garrison Trooper
Indlæg: 2380
Tilmeldt: tirs 23 aug 2016, 12:48
Geografisk sted: Broby

Re: ESB Vader boots

Indlæg af 10413 »

Det er svært at vurdere med et rent billede, som det her... men umiddelbart, hvis sålerne holder tykkelsen indenfor det angivne, så skulle de være gode nok ;-)

Evt. prøv at spørge ovre på Sith detachmenten, der sidder nogen meget kyndige folk der til netop at hjælpe med at vurdere støvler osv ;-)

CRL http://databank.501st.com/databank/Cost ... _esb_vader siger :

Boots
For 501st approval:
The boots are made of black leather (or leather-like material) with a medium gloss shine and are lace-less.
They come to just below knee height, have a rounded toe, and a smooth textured appearance.
There is no noticeable zipper in full costume.
The sole of the front does not exceed one inch in thickness and the heel does not exceed two inches in thickness.
Note: The strap/buckle at the top is not required; this area is covered in full costume and may or may not be there based on the style of boot.

For level two certification (if applicable):
The boots should be made of leather.
The sole should not exceed one and one-half inches in the heel or three-quarter of an inch in the front.
Internal lifts (if used) should not be noticeable.
TFE mentor 2013->, staff 2017->,Command 2019 ->
LCA 2019/20/21, GMBO 2021
Appr: Visas Marr/Tie Reserve/Bridge crew/Gunner/jawa/Darth Nihilus /Army Engineer
Retired: Biker scout/Darth Traya/Tie Pilot ANH/Tusken

Besvar